Receiving Card MRV300

Under all the three different working modes of it, two 50P interface can output different data, and only one common program and software are required. No customized program is needed. Interfaces are defined as follows:

1) 16-group data mode Supporting 16-group of RGBR 'parallel data, defined as follows: Virtual R signal in the last data group of each 50pin hub is decoding signal E at 1/32 scan mode.

2) 20-group parallel data mode Supporting 20 sets of parallel data.

3) 64-group serial data mode Supporting 64 sets of serial data, defined as follows: Under serial mode, there are 64 data cables totally. Each cable can drive one LED bar independently. In case of horizontal LED bar, the default is that Data1 drives the first row from the top and Data64 drives the 64th row. (front view). In case of vertical LED bar, the default is that Data1 drives the first column of from the left and Data64 drives the 64th column. (front view).

Thickness of the board is about 1.6mm. The overall thickness (board thickness＋thickness of the components on front and back side) is about 18.5mm.

Rated voltage : 3.3 5.0 5.5 V
Rated current : 0.33 0.50 0.55 A
Temperature of working environment : -20.0~70.0 ℃
Humidity of working environment : 10.0~90.0 %

To meet the needs of different customers, Nova has provided more specific models of the products, including standard products in stock. Other models need to be customized.

MRV300－1 Standard model, male connector on top
MRV300－2 Male connector on bottom
MRV300－3 Female connector on top
MRV300－4 Female connector on bottom