Receiving Card MRV210

Under all the four different working modes of it, four 26P interfaces can output different data. Interfaces are defined as follows:

1) 16-group data mode（With virtual output）Supporting 16-group of RGBR 'parallel data, defined as follows: it support 1/32 scan mode in 16-group data mode, and R4B，R8B，R12B，R16B are decoding signal E. Pin 9 is decoding signal Ctrl below 1/16 scan mode(contain 1/16 scan). Pin 8 is decoding Ctrl signal in 1/8 scan and below.

2) 20-group data mode Supporting 20 sets of parallel data, defined as follows: Pin9 is Ctrl signal in 1/16 scan and below, and Pin 8 is decoding Ctrl signal in 1/8 scan and below. 

3) 24-group data mode Supporting 24 sets of parallel data, Serial data decoding is required for scan mode above 1/4 scan (Serial data decoding circuit in the appendix),
defined as follows:

4) 64-group serial data mode Supporting 64 sets of serial data, defined as follows: Under serial mode, there are 64 data cables totally. Each cable can drive one LED bar independently. In case of horizontal LED bar, the default is, Data1 drives the first row from the top, and Data64 drives the 64th row. In case of vertical LED bar, the default is, Data1 drives the first column of from the left, and Data64 drives the 64th column.

Thickness of the board is about 2mm. The overall thickness (board thickness＋thickness of the components on front and back side) is about 18mm.

Rated voltage : 3.3 5.0 5.5 V
Rated current : 0.33 0.50 0.55 A
Temperature of working environment :-20.0~70.0 ℃
Humidity of working environment : 10.0~90.0 %

MRV210－1 Standard model, male connector on top
MRV210－2 Male connector on bottom
MRV210－3 Female connector on top
MRV210－4 Female connector on bottom