รหัสสินค้า | A4 | การปรับปรุงการแสดงผล | Supporting pixel level brightness and chroma calibration : Working with NovaLCT and NovaCLB, A4 supports brightness and chroma calibration on each pixel. Supporting image rotation in 90° increments (Calibration not supported after rotation) : On NovaLCT, the image on the screen can be set to rotate in the multiples of 90° (90°, 180°, 270° and 360°). Supporting quick seam correction : Working with NovaLCT, A4 supports quick adjustment of bright and dark lines, which can remove the seams between modules and between cabinets. Supporting 3D function : On NovaLCT or operation panel of controllers which support 3D function, you can enable 3D function and set the 3D parameters to make the LED screen display 3D effects. |
ปรับปรุง การบำรุงรักษา | Supporting LVDS transmission (Supported by dedicated firmware program) : The transmission mode of low-voltage differential signaling (LVDS) is used, which reduces the number of data cables that connect the receiving card's HUB board to the module, increases the transmission distance, improves the signal transmission quality, and better stabilizes the image output. Supporting setting of images pre-stored of the receiving card : On NovaLCT, the specified images could be set as the screen startup image and images used when the Ethernet cable is disconnected or no video source signal is available. Supporting module Flash management : On NovaLCT, lamp panel Flash could be managed. Supporting monitoring voltage and temperature of itself : The voltage and temperature of the receiving card itself can be monitored without using other peripherals. The monitoring data can be checked on NovaLCT. Supporting LCD module : Supports NovaStar's general 5-pin LCD module. The LCD module is connected to the HUB board to display temperature, voltage, single operating time and total operating time of the receiving card. Support one-click application of calibration coefficient in module Flash : In the event of network outage, hold down the selftest button to read the calibration coefficient in module Flash back to the receiving card. |
การปรับปรุงของฮาร์ดแวร์ | Supporting dual-power backup detection : Two power supplies could be simultaneously connected, and operating status of the power supplies could be detected. Supporting loop backup : HUB’s Ethernet port improves the reliability for the serial connection of the receiving card through main and standby redundant mechanism. Among the main and standby serial connection lines, if one fails, the other will begin to work to ensure the normal operation of the display. |
การปรับปรุงซอฟต์แวร์ | Supporting readback of firmware version : On NovaLCT, the firmware versions of the receiving card can be read back. Supporting readback of configuration file On NovaLCT, the receiving card configuration parameters can be backed up to the receiving card. On NovaLCT, the receiving card configuration parameters can be read back. |
แรงดันไฟฟ้าเข้า | DC 3.3 V–5.5 V |
พิกัดกระแสของมอเตอร์ดีซี | 0.5 A | ความเข้มของการส่องสว่าง | 2.5 W |
อุณหภูมิในการทำงาน | -20°C–70°C | อุณหภูมิใช้งานปกติ | -25°C–125°C |
ความชื้นในการทำงาน | 10%RH–90%RH | ขนาด | 67.6 mm × 38.9 mm × 6.1 mm |
น้ำหนักสุทธิ | 9.9 g | มาตราฐานการรับรอง | RoHS |
การบรรจุ | An antistatic bag and anti-collision foam are prepared for each receiving card. Dimensions of the packing box: 378 mm × 190 mm × 120 mm, each of 40 receiving cards. |